Tips On How To Extend Smok Pen Recharge Time

smok pen

Tips On How To Extend Smok Pen Recharge Time

The Smok Pen is really a new pen that was created by two guys in California. They wanted to develop a cool writing instrument that looked like a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the market by storm.

The Smok Pen includes a built quality that is just great. I came across that even though it is an electronic pen the construction is simply as good as any of the pens that I’ve reviewed. For the reason that of how they made the very best cap. You don’t have to be worried about the cap cracking or breaking you Smok Valve Pen.

The two biggest differences that separate the Smok Valve from other pens may be the form of the coils and the way that they are built. Generally the coil on a Smok Pen is bigger than on other pens. I believe that they did this deliberately, to help make the pen feel bigger.

Invest the a glance at a Smok Pen, you will observe that the body of the pen is round rather than smooth like other pens. On the trunk of the pen you will find a little tab that houses the coil. Once you press on the tab it is simple to turn the heating element on / off. I must say i liked this feature because it allows me to utilize the Smok Pen 22 whenever I feel like smoking.

To utilize the Smok Pen it is advisable to keep carefully the heat button pressed. After the button is pressed, the heating element will begin to warm Vape Shop up. Once it reaches the appropriate temperature it is possible to switch off the heating element. Smok recommends using a 22mm tank. I prefer a larger tank, but that’s just me.

Once you put your Smok Pen into the tank you will see a indicator light come on. The indicator light will remain green unless you put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is very important always put your pen in to the charger before you apply the e-liquids to the coil heads. It is also important to do that before putting your e-liquids in to the coil heads.

After you have completed this step, you should always check to see for anyone who is at the right temperature for the coils to fire. If not then you should turn the power off and try again. When you are still not satisfied with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is what I’d call the “troubleshooting process” because sometimes things just usually do not work as they should. I suggest that you perform the next two steps, then go on and check the Smok Pen to see if it still gets the electronic charging port.

Before you go any further you should remove the battery from your pen and unscrew the magnetic cap. You should then take away the plastic sleeve that holds the sub-ohm. You will find a wire that runs through the Smok’s body that is green in color. You should loosen this wire using pliers. Once you have loosened this wire after that you can access the sub-ohm. You need to then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch any of the coils.

Once you have placed the sub-ohm tank in to the pen you need to then place the rest of the components like the wattage, the batteries and the heating element into the included microwaveable microwave oven. Start the energy and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it cool off. When you first put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.

Once the Smok Pen has already reached the temperature that it requires to reach you need to then connect both wires to the negative and positive on the positive post on the Smok unit. You should then connect the other end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to the bottom of the Smok’s power switch.

After all the components have been placed in to the pen, you should turn the energy on. After the first test run, you have to be able to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and then replace it with a brand new one. For your convenience there is also a green light that can be pressed to be able to confirm the battery charging status. If you have done these things and you do not start to see the green light indicating charging, you need to replace the battery.